|
PowerDsine PD-AS801/12 High Power PoE active splitter
|
The PowerDsine PD-AS801/12 High-Power PoE Splitter is used in conjuction with PowerDsine PD8001/8006/8012 High Power Midspans. An Ethernet cable run from a PoE midspan carries both data and power. This device splits the data from the power which is being received from an Ethernet cable carrying both. Using a PoE Splitter allows IP cameras with no built-in PoE support to be used in a PoE set up. Power over Ethernet provides a cost effective method of installation and gives greater flexibility ...
|
|
AXIS PoE Active Splitter 5V 5008-001
|
The Axis 5008-001 Power over Ethernet (PoE) Active Splitter separates the DC voltage and network data from an Ethernet cable carrying both. Using a PoE Active Splitter allows network cameras with no built-in PoE support to be used in a PoE configuration. PoE installations are a cost effective and reliable method of installing security cameras on an IP network while providing the ability to install cameras where locating power outlets would be difficult. Compatible with an Axis 205, 206, 206M ...
|
|
PowerDsine PD-8001/AC-UK High Power PoE Midspan
|
The PowerDsine PD-8001/AC-UK 1-Port High Power PoE Midspan is for use in combination with the PowerDsine PD-AS801/12 PoE Splitter. This PoE Midspan injects high power into a standard ethernet cable (e.g. standard CAT5E), enabling Pan-Tilt-Zoom IP cameras to be installed using a single cable only. This 1 port version enables power injection in one ethernet cable only (6 and 12 port Midspans are also available). The PoE Midspan can be installed anywhere on the ethernet cable run but is typically l...
|
|
PowerDsine PD-AS401/12 Power over Ethernet active splitter
|
The PowerDsine PD-AS401/12 48V to 12V Active Power-over-Ethernet (PoE) Splitter is used to split the data from the power that is being received from an ethernet cable carrying both. Using a PoE Splitter allows IP cameras without built-in PoE support to be used in a PoE set up. Power over Ethernet offers a cost-effective, reliable method of installing security cameras on an IP network.
This Power over Ethernet Splitter is compatible with a range of PoE Midspans and network cameras.
For a list of ...
|
|
PowerDsine PD-3012/AC-UK Power over Ethernet Midspan 12 port
|
The PowerDsine PD-30012/AC-UK 12-Port Power over Ethernet Midspan is for use in combination with PoE Splitters or IP cameras that have built-in IEEE802.3af PoE support. The PoE Midspan injects power into a standard ethernet cable (e.g. standard CAT5E), enabling power and data to run over a single cable. This 12 port version enables power injection in to up to 12 ethernet cables (1 and 6 port Midspans are also available). The PoE Midspan can be installed anywhere on the ethernet cable infrastruct...
|
|
PowerDsine PD-3006/AC-UK Power over Ethernet Midspan 6 port
|
The PowerDsine PD-3006/AC-UK 6-Port Power over Ethernet Midspan is for use in combination with PoE Splitters or IP cameras that have built-in IEEE802.3af PoE support. The PoE Midspan injects power into a standard ethernet cable (e.g. standard CAT5E), enabling power and data to run over a single cable. This 6 port version enables power injection in to up to 6 ethernet cables (1 and 12 port Midspans are also available). The PoE Midspan can be installed anywhere on the ethernet cable infrastructure...
|
|
PowerDsine PD-3001/AC-UK Power over Ethernet Midspan 1 port
|
The PowerDsine PD-3001/AC-UK 1-Port Power over Ethernet Midspan is for use in combination with a PoE Splitter or IP cameras that have built-in IEEE802.3af PoE support. The PoE Midspan injects power into a standard ethernet cable (e.g. standard CAT5E), enabling power and data to run over a single cable. This 1 port version enables power injection in one ethernet cable only (6 and 12 port midspans are also available). The PoE Midspan can be installed anywhere on the ethernet cable run but is typic...
|
